       |
Let's make the speaker of Mr. Tetsuo Nagaoka's design. the flow of river like A back load phon also in the speaker of the teacher who exists in large numbers It is. It uses the sound of the rear surface which comes out from a speaker unit. It is the system which carries out and increases low-pitched sound. Although the origin of a river is a small flow, it consists of a middle class down-stream, and it is to the sea in the beginning. When flowing, it is a terrible big thing. It is the same reason as this. Low-pitched sound is larger than an air room (place with a unit) rapidly toward a bottom. The way of sound carried out is progressed, and it changes to big energy and becomes reproduction of heavy low-pitched sound. That is, it is a device for taking out low-pass. A resonance pipe is a system using pipe resonance. An empty bottle and a pet Please blow the month, if there is a bottle. Low-pitched sound will come out. This is reason. Maker make has neither. Maker It does not do. Although there was the past, it is not now. It is the world made only to a handmade speaker. Moreover, handmade is the pleasure which makes personally what has only one in the world. A unit corresponds by the from full range 1. It is the device which produces rich sound of music. Two ways and three ways it does not become such a natural sound that a unit has much It is easy to become such an artificial sound, and is Singh that there are many circuits, such as a capacitor. The pull from unit 1 is good. Why does a full range come out in such low-pitched sound by one piece? This is the first. The heard direction is surprised and it always says. The unit of a full range Since it is reproducible from low-pass to a high region, this is used, and it is about low-pass. It expands with the device of - jar. For loud sound, vibration is high speed. a sake - a unit to direct sound - coming out . In the case of D58, it can be considered that the effect as Tweeter is a point sound source to 13kHz. As Woofera, with about the same feeling of a scale as 38cm, The image of sound is small and a sound place It is made large very grand. Moreover, it united with the characteristic and capability of a unit. A cabinet is needed. There are some kinds of plans in D58.  A unit uses the product made from Fostex. By the speciality of a speakerunit It can be used in comfort from The unit of Fostex has high efficiency. They are things. An output sound pressure level is 99dB (decibel) in FE208ES. there is little distortion with a range large [ the merit from full-range 1 ] it permission-inputs It is a big system. The maximum handmade charm uses the high unit of the efficiency of Fostex. It is making the high (90dB or more) speaker of an output.  E∑ series of sale Fostex is not limited sale. ES series is inherited and the price is pressed down. the first in handmade It is the unit which even the direction and a maniac can use. I can use this unit. It inquired from the inside of Mr. Nagaoka's design of enclosure. The system of the result some came out. We recommend you with confidence. These can be purchased from my site and made to a question or the announcement of a work again. It was made like. I want to extend the friend of a handmade speaker. Making musical culture personally and this are connected with tomorrow's culture. |
| A speaker is seen | D-101S To a super swan D58-ES Nessie Jr Rear canon II * The speaker currently introduced with E-speaker service is a handmade speaker. The handmade speaker basic lecture of page explains in detail. It links to a handmade speaker basic lecture. |
 D101S super swan The 1st place Nagaoka Tetsuo The chief editor's book |
Swan system back load phon D-101S Super swan The more nearly first one also has the speaker of a best seller, structure, and the optimal its original work to like. It excels in point sound source reproduction at a feeling of a sound place. A head is small and it is here from the sealed type of a mini speaker, and Pipe. If the body applies, there is The way of sound, and it is a back load phon, i.e., a mini. It is the speaker which the exciting back load docked with merit. Use of a back wall increases low-pitched sound further for a rear surface opening. The dead space of a body is filled up with a pebble or a lead. The plan of enclosure corresponds to FE108 supermarket. FE108 super output sound pressure level 93dB magnet weight 442g Fo-18kHz However, since there is no unit, it becomes E∑. * FE108E∑ -- output sound pressure level 90dB magnet weight 400g Fo-23kHz HP oscillating board ES corn 1.2kg of gross weight The standard suits the supermarket of E ∑ like looking. ___________________________________________________________________________________________________ D101S are a width of 160mm of a head. Side 370mm A height of 1010mm Depth of 375mm Full length of The way of sound 2450mm Those with a dead space The attachment hole of a speaker 100mm 2.5 15mm plywood (910×1820mm board) unit FE108E∑x 2 \20,580 Terminal It is T100x2 \6,510 Terminal It is T150Bx2 \4,200 |
 D-118 A photograph is D-118ES. A unit is FE-108E ∑.  |
CW phon system back load phon D-118 The more nearly first one also has optimal 10cm back load phon and its original work which are easy to make. The way of sound structure with foundations fundamental at D-100 is not changed. After FE108ESII of limitation is put on the market, it corresponds to this unit. It was announced as a thing. It is filled up with the small gravel of Pebble or a grain to a bottom, and is a gently-sloping phon opening. It prepares in a form, the surface is covered with sound-absorbing materials, such as thin felt, and it is reflection of inside loud sound. A unit can use E ∑. D-118 is popular as a 10cm version of a back load. It is small and the sound which is not troubled by the space has the feeling of a spread of low-pitched sound. It is the good wonderful speaker of balance. It is introduced to the April, 2001 issue of a stereo. * I am requested from a stereo magazine, participate in a "way ship" audition meeting, and hear these D-118. Things were made. My experience report has appeared. It was the same as that of a super swan, and was surprised with whether such low-pitched sound comes out by 10cm. The plan of enclosure corresponds to FE108ESII. FE108ESII output sound pressure level 91dB magnet weight 585g Fo-20kHz However, since there is no unit, it becomes E ∑. * FE108E∑ -- output sound pressure level 90dB magnet weight 400g Fo-23kHz HP oscillating board ES corn 1.2kg of gross weight ______________________________________________________________________________________________ D118 Side 190mm A height of 915mm Depth of 400mm The attachment hole of a speaker 100mm 2.5 15mm plywood (910×1820mm board) unit FE108E∑x 2 \20,580 Terminal It is T100x2 \6,510 Terminal It is T150Bx2 \4,200 |
 D-55 The 2nd place Nagaoka Tetsuo The chief editor's book A photograph is D55.  |
CW phon system back load phon The width of CW of The way of sound is fixed, and it extends the cross-section area. D-55 The developed type of D-50 which carried out thorough strengthening for low-pitched sound reinforcement The back load phon loved for a long time also in the handmade speaker In No. 1, BH moved forward by D-50 and from FE 206∑1. the appearance of FE208S -- D-77 Mr. Nagaoka announces D-55 from one, and looks and tone quality serve as a big hit well. If the specialists of a handmade speaker also use FE208E ∑, it will be about D55. He has recommended. The back load phon after D-55 is the same plan as D-55 and is et al. SS ES has a design of Mr. Nagaoka. It is not E∑. From here It is necessary to choose in the idea of the direction which carries out handmade. Am I D-55 at FE208E∑? We recommend you D-57. The speaker as main Since this speaker becomes main, please choose carefully and make it. Moreover, to making, it does not come gaily halfway. Since time is also taken again A scrupulous manufacture plan is required. For example, it is [ what reservation of the place to make is carried out, and ] an age. Please consider , a tool, etc. For making a good thing, let's spend many hours slowly. Moreover, finish is Sandpaper and a paint. Let's and finish beautifully. Joy when the thing which goes satisfactorily is made is joy on heavens. The plan of enclosure corresponds to FE208S. E208S Magnet weight 1,821g Output sound pressure level 98dB Fo-20kHz However, since there is no unit, it becomes E ∑. FE208E ∑ magnet weight 1,409g Output sound pressure level 97dB Fo-14kHz HP oscillating board ES corn 4.8kg of gross weight The standard suits S of E ∑ like looking. We recommend you D55. In the direction which was not able to be made from the fan of Mr.Nagaoka until now We recommend you D-55. ______________________________________________________________________________________________ D-55 Air room 6.7L Side 444mm A height of 921mm Depth of 561mm Plywood 21mm 5 sheet (910×1820mm board) attachment hole 185mm unit FE208E∑x 2 \39,480 Terminal It is T100x2 \6,510 The addition of phon super Tweeter It is phon super Tweeter Tweeter T90Ax2 \31,500 It is film capacitor CS0.47micro-Fx2 \4,620 |
 D-58ES The 8th place Nagaoka Tetsuo The chief editor's book A photograph is D-58ES. .  D-37 A photograph is D37-ES. . |
CW phon system back load phon I will make the masterpiece of a back load phon from FE208E ∑/FE168E ∑. E∑ series inherited HP oscillating board and ES corn of ES series. It is a full-range unit. CW phon which used E ∑ has the following system other than D-55. D-58 D-58 is development from D-55, and the whole benefits reinforcement of low-pitched sound somewhat large. The side is a place called D-57 in D-55 height. 444wx1042Hx550D D-58ES extends an air room in order to carry out attachment possible [ of the FE208ES of limited sale ]. Only depth spread 17mm. The plan of enclosure corresponds to FE208SS. FE208SS magnet weight 3,642g output sound pressure level 99dB Fo-20kHz However, since there is no unit, it becomes E ∑. * FE208E ∑ magnet weight 1,409g Output sound pressure level 97dB Fo-14kHz HP oscillating board ES corn 4.8kg of gross weight A difference is in a magnet like looking. In E∑ - D55 is the more nearly optimal. . But please make the direction with surely sufficient D-58. __________________________________________________________________________________________________ D-58 Air room 8.9L Side 444mm A height of 1042mm Depth of 553mm Plywood 21mm 8 sheet (910×1820mm board) The attachment hole of a speaker 185mm unit FE208E∑x 2 \39,480 Terminal It is T100x2 \6,510 The addition of phon super Tweeter It is phon super Tweeter T925Ax2 \58,800 It is film capacitor CS0.47micro-Fx2 \4,620  ________________________________________________________________________________________________ D-57 It is more slim and is the good speaker of proportion. In enclosure, a plan corresponds to FE208S or ∑. E208 ∑ magnet weight 1,700g Output sound pressure level 96.5dB Fo-20kHz However, since there is no unit, it becomes E ∑. * FE208E ∑ magnet weight 1,409g Output sound pressure level 97dB Fo-14kHz HP oscillating board ES corn 4.8kg of gross weight The standard suits ∑ of E ∑ like looking. We recommend you D-57. ___________________________________________________________________________________________________ D-57 Air room 8L Side 384mm A height of 1042mm Depth of 550mm Plywood 21mm 8 sheet (910×1820mm board) The attachment hole of a speaker hole 185mm unit FE208E∑x 2 \39,480 Terminal It is T100x2 \6,510 The addition of phon super Tweeter It is phon super TweeterT90Ax2 \31,500 It is film capacitor CS0.47micro-Fx2 \4,620 ___________________________________________________________________________________________________ D-37 I will make 16cm CW phon from the compact design of D-57. The plan of enclosure corresponds to FE168 ∑. FE168 ∑ magnet weight 840g Output sound pressure level 94dB Fo-20kHz A unit becomes E ∑ more powerful than ∑. * FE168E ∑ magnet weight 721g Output sound pressure level 94.5dB Fo-21kHz HP oscillating board ES corn 2.6kg of gross weight The standard suits ∑ of E∑ like looking. Compact merit is the thing of a 16cm no one but. ___________________________________________________________________________________________________ D-37 Air room 5L Side 300mm A height of 1000mm Depth of 450mm Plywood 15mm 5 sheet (910×1820mm board) The attachment hole of a speaker hole 151mm unit FE168E∑x 2 \33,180 Terminal It is T100x2 \6,510 The addition of phon super Tweeter It is phon super Tweete FT96Hx2 \23,520 It is film capacitor CS0.47micro-Fx2 \4,620 |
 Nessie JrES A photograph is Nessie JrES. |
Resonance pipe system Nessie Jr 16cm which becomes main [ a home theater ] in the room of 8 to 10 mats It is a resonance pipe. Plan (1) It is Printing to Method Ship Project of Mini of Audio Accessories Magazine. Nessie JrES (a unit is FE168ES) (2) a design of Mr. Nagaoka -- F-2000 Nessie Jr (a unit -- FE168E∑) It is. For the accessories version, a top ゜ pipe is [ a big difference ] the Kamiide and the front. There are two kinds JrES is expanded a little for size 20% with the cross-section area from . A front is combination like Nessie Jr and rear Nessie Mini of Surround front can do usage like D-55 and 58 rear Nessie Jr. Manufacture needs for there to be no crevice and to make accuracy high. Use of Bolting metallic ornaments It is required for especially the portion of a two-sheet pile. before using a bond plywood exactly if it is careful of whether it is correct, and it is shaved as plywood is unexpected and it is exactly carried out Please use a bond. The plan of enclosure FE168E ∑ magnet weight 721g Output sound pressure level 94.5dB Fo-21kHz HP oscillating board ES corn 2.6kg of gross weight ________________________________________________________________________________________________________ Nessie Jr is a height of 2100-2300mm 230-260mm of sides. Depth of 300-320mm Plywood 15mm JrES is five sheets, and Jr is four sheets (910×1820mm board). The attachment hole of a speaker hole JrES is 155mm and Jr is 151mm. unit FE168E∑x 2 \33,180 Terminal It is T100x2 \6,510 The addition of phon super Tweeter It is phon super Tweete T90Ax2 \31,500 It is film capacitor CS0.47microFx2 \4,620 |
 Nessie Mini A photograph is Nessie Mini. A unit is FE-108E∑. |
Resonance pipe system Nessie Mini The the best for Surround of the home theater in the room of 8 to 10 mats It is a 10cm resonance pipe. Moreover, it is the speaker which can be used also as main. The example of combination (10cm Nessie Mini and 8cm rear canon Mini) (1) Front = Nessie Jr, Rear = Nessie Mini, and Back Rear = Rear Canon Mini (2) Front = D-37/D-118-/Super Swan Etc. Rear = Nessie Mini, back rear = rear canon Mini (3) Front = Nessie Mini, Rear = Rear Canon Mini * As a mini home theater of a "way ship", they are Nessie Mini and the rear canon Mini. It can use carrying out a front / rear one / back rear . Carry a plan in the method ship project of a mini of an audio accessories magazine. It was carried out and a front is as Nessie Jr and Nessie Mini of rear It was announced. BS digital, ground wave digital, DVD, and a home theater This environment is increasing. To a high sound of a grade, and the handmade speaker which the room unites and can respond I think that the direction of the home theater to depend made further increases. In making the sound of a home theater, just Nessie series matches in it. Probably, there is nothing that is carried out. It is surely about your dream theater at it is Although it is the design of FE108ESII of limitation, FE108E ∑ can be used. The position of a unit is 915mm from a floor so that it can use as a design being main. It is alike and has carried out. rear one -- since it is too low when using for business -- 100mm - 200mm The Surround effect will become high, if handmade [ of the speaker stand ] is carried out and it is placed. Of course, it arranges by use mainly with this. Height can be lengthened to 2080mm and troubled by the common house. An assembly is when necessity and gap have cautions in the accuracy of the portion which carries out a two-sheet pile. Since it is not settled, as for use of necessity and Bolting metallic ornaments prudent work arranges size. The accuracy of a result is different if it sets. Although the point of work of a resonance pipe is that there is no crevice if plywood maneuvers Although it understands, it curves and is It checks for no crevice, before attaching a bond. To correct is required for work of a resonance pipe. My handmade speaker Please look at for Nessie Jr. Nessie and rear canon are me, although there is height, and it is unstable and does not fall. It prevents falling, insulator combination places and the stand is made. FE108E∑ -- output sound pressure level 90dB magnet weight 400g Fo-23kHz Full range which adopted HP oscillating board ES corn 1.2kg of gross weight ___________________________________________________________________________________________________ Nessie Mini Side 170mm A height of 1830mm Depth of 230mm attachment hole 100mm Three 15mm plywood (910×1820mm board) unit FE108E∑x 2 \20,580 Terminal It is T100x2 \6,510 Terminal It is T150Bx2 \4,200 |
 QS106 rear canon II A photograph is rear canon II. . |
Resonance pipe system QS106 rear canon II It is designed as a rear speaker used by Mr.Nagaoka"Way ship" rear one, such as an object for Surround of a home theater, and a DVD audio as business It is the high speaker of evaluation. Since the position of a unit is in a height of 1195mm The effect of Surround shows up. In a general height of 900mm, it considers as Surround it elapses Since the number of units is two, it is also the feature that directivity is expanded. It consists of the 1st pipe and the 2nd pipe with a resonance pipe, and the full length of a pipe is set to 3M. Although it is not, it makes exactly that it is [ which is spread on making in difficulty ] careful, and a crevice It is making it there be nothing. The things L and R which an odd change and Bolting metallic ornaments are prepared for it and assembled carefully influence. Since it is a symmetrical form, it is paying attention enough to NO of a component. Especially enclosure has not determined the unit. FE108E∑ -- xtwo Magnet weight 400g Output sound pressure level 90dB Fo-23kHz HP oscillating board ES corn 1.2kg of gross weight ________________________________________________________________________________________________________ Rear canon II is resonance pipe full length 3M. Side 225mm A height of 1595mm Depth of 225mm Plywood 15mm 3 sheet (910×1820mm board) The attachment hole of a speaker 100mm unit FE108E∑x 4 \41,160 Terminal It is T100x4 \13,020 Terminal It is T150Bx4 \8,400 |
 A photograph is the rear canon Mini. .  |
Resonance pipe system  Rear canon Mini I will enjoy the sound of Mr.Nagaoka"Way ship" at ordinary homes. The rear canon Mini is method-ship[ of a mini ]-projected. It was come out and announced, a front is Nessie Mini, and it is the rear canon Mini of rear. . Although there is upper QS106 rear canon II as only for rear one It is well alike like looking with this reduction version. The full length of a resonance pipe is 3M, height 1615, and a unit with the resonance pipe of 1-time bending. it attaches to 1215mm from the bottom -- having -- rear one -- as height of business, it is enough a common maker speaker -- rear one -- it is [ nothing of the height of business ] and is too low Although Surround in a movie theater is also so, a speaker is in a not much low place. It does not become precocious. a sofa etc. -- sitting down -- a front -- 900mm of the height of an ear, and rear -- good It is good that a speaker is in a high position. A unit is FE83E and a front is Nessie Min, and D-118 and a super swan. In the case where it was alike and carries out, I think that rear does not win and rear is carried out and it is satisfactory. The high region is also enough extended [ the number of reproduction frequency bands ] by the top by 30kHz. Manufacture is as a method, although it is there being no crevice exactly and making a resonance pipe portion. in order to make a part correctly -- the character type gauge board (with paper with this thicker) of ロ Three kinds of every two -each 3 are made, and are placed, and it is also the variation in the board thickness of a component. It sees and arranges and assembles carefully using a gauge board. Furthermore polite in the surface of a board To grind [ it is alike and ] and finish is good. * FE83E Output sound pressure level 88dB magnet weight of 140g Fo-30kHz Full range which adopted HP oscillating board ES corn 0.36kg of gross weight What and 3,129 yen per piece Moreover, it is extended to the reproduction frequency of 30kHz. ________________________________________________________________________________________________________ The rear canon Mini is resonance pipe full length 3M. Side 180mm A height of 1615mm Depth of 180mm Plywood 15mm 2 sheet (910×1820mm board) attachment hole 72mm Unit It is FE83Ex4 \12,516 Terminal It is T150Bx4 \8,400 Terminal It is P24B0x4 \5,040 It takes into consideration and assembles |
 D-83 Flamingo A photograph is a super flamingo. . A unit is FE-88ES. |
Swan system back load phon D-83 Flamingo It was designed by FE83 at the beginning. It is upgraded FE83E now. It can Please make a dear speaker from a family. Depth is deep in order to take the capacity of a head. The feature is the speaker which can be sounded with that it can use in the narrow room, and a four-and-a half-mat Japanese room. I think that it is good for the direction which makes especially a handmade speaker for the first time It is surprised at the feeling of a scale and the feeling of a sound place which cannot be regarded as 8cm 1 [ from ]. Although a rear surface opening is the swan type feature, it uses a back wall and it is Low-pitched sound . It can increase. Even if it says "Listen to volume in the small room" Low-pitched sound is attractive for a back load phon. It is saying that the direction of junior high school student grade and a woman can also do as for having taken up this time. if it is called a handmade speaker -- about a maniac it [ of a man ] person -- therefore I want to make such a dear speaker from a family very much. It added in such a feeling this time.  * FE83E Output sound pressure level 88dB magnet weight of 140g Fo-30kHz Full range which adopted HP oscillating board ES corn 0.36kg of gross weight What and 3,129 yen per piece Moreover it is extended to the reproduction frequency of 30kHz. __________________________________________________________________________________________________ D-83 flamingo Side 243mm A height of 1060mm Depth of 240mm attachment holee 72mm Two 15mm plywood (910×1820mm board) Unit It is FE83Ex2 \6,258 Terminal It is T150Bx2 \4,200 Terminal It is P24B0x2 \2,520 |
 D-3MKII.1 The back load phon of a new appearance FE208E ∑ is used.  |
CW phon system back load phon D-3MKII.1 A design corresponds to the FE208E ∑ present by the object for FE208 ∑. D-58ES from D-55 -- an angle -- it is large To it and a limited unit a design -- It united -- by things, a back load uses an expensive unit It is a fact that things had become like a premise. For the reason, it is from the problem of an installation place. Slimer D-57 was designed. Although the maximum is D-58ES and sound is wonderful, of course, is it when placing? Please think that there is no . In D-58ES which I manufactured, a pebble is put into a bottom and it is set to 50kg at one side. The 20cm back load phon which can taste neither in 10cm nor 16cm It seems to be in the dreadfulness of Heavy low-pitched sound. Moreover, speakers enough as main are 20cm. consider. If this back load is made smaller, it will be thought that many directions may be able to be made. it was. It is the appearanc e of a back load phon new still more. Since it is a little small and miniaturizes even if compared with D-37 in a size, it is in the room. It can put on 6 or more mats, and can sound. It is the economical design which makes two from board material 21mm with three 910×1820mm board plywood. This is two sheets. It is because there are comparatively few not carrying out the pile and parts. Although structure is the same as CW phon, as for the feature, The way of sound Wood is attached aslant. They are things. Since he way of sound becomes a curve as a phon closely although it seems to be effective It is writing an attachment position in assembly work with a pencil at a side board. Like D-58 grade, since it is not large-sized, it is wonderful that an assembly is alone possible. Measurement is the thing of a flat back load phon splendidly. For reproduction, in a high region, Low-pitched sound is to 50kHz to 15Kz grades by measurement of a stereo magazine. It is high-level and is maintained. The affinity with FE208E ∑ is satisfactory. With basic [ of the handmade speaker foundation of the page of a handmade speaker ] (5) A back load phon and this speaker are explained. To handmade speaker basic lecture (5) ____________________________________________________________________________________________________ D-3MKII.1 is 282mm of sides. A height of 950mm Depth of 430mm 910×1820mm board plywood 21mmx3 sheet FE208E∑ x2 attachment hole 185mm unit FE208E∑x 2 \39,480 Terminal It is T100x2 \6,510 The addition of phon super Tweete It is phon super Tweete T90Ax2 \31,500 It is film capacitor CS0.47micro-Fx2 \4,620 |
 A photograph is D-58ES. T100 is attached.  D-58ES  T100 Large-sized gilding terminal 8mm of holes made in a board The code of +- from a unit To the terminal of the bottom of a terminal It solders. Before the assembly of a cabinet It connects with the unit. |
Terminal <- large-sized gilding terminal T100 (quality articles)  It is a plus and minus independent type. A speaker unit and a cable It ties and is required for a handmade speaker. 8mm is suitable for the hole made in a board. main from a terminal T100 is connection when connecting also with - car or super Tweeter A hole is fixed with the screw on (0-55mm). Back load phon It is the terminal which is easy to use for Resonance pipe ____________________________________________________________________________________________________ A price is speaker 1Set. Terminal It is T100x2 \6,510 Terminal It is T150Bx2 \4,200 Terminal It is P24Bx2 \2,520 Copper point-of-contact terminal T150B Speaker terminal P24B     What attached +- in the plastic terminal board by the small object for boxes . It is attached only by making two holes (12mm) in a back board. A terminal board is a screw type. Degradation of tone quality is a supermarket although it is not. Since the hole is small to connection with Tweeter, it is not fit for it. |
 A photograph is a super swan It is P108 adapte ring to a swan. It has attached.  |
Adapter ring P108 adapter ring It can use for 10cm unit FE108ES, ESII, ∑, and E∑. The outline and speediness of improve by the product made from true. Participate in the "way ship" audition meeting of Co., and it is from く D-118 experience report >. When the adapter ring P108 is attached, it is the sharp of a clear feeling and sound. was surprised at increase and the sound with which especially low-pitched sound clarified. At "the spring festival", when attached, sound changed completely. This is clear. Admiration becomes good and thinks that sound of every 1 sound has come out. In continuous hits of timpani, a feeling of a scale with intense sound It has changed. The bowstring is also beautiful. The tone and tone quality which are true and attach this an adapter ring It is wonderful to have become beautiful. Ida of the STELEO April, 2001 issue P107 Masao's report ____________________________________________________________________________________________________ It is the price of speaker 1SET. (10cm) It is P108 adapter ring x2 \29,400 (16cm) It is P168 adapter ring x2 \37,800 (20cm) It is P208 adapter ring x2 \46,200 |
 A photograph is to a super swan. KG810 grill It has attached.  |
Speaker grill High steel punching of a high precision resin fabrication frame and intensity It consists of grills and is strong. It is required for the direction in which a child is present. An important unit is protected safely. ____________________________________________________________________________________________________ It is a cautions 2 piece 1 set price. For 10cm round shape frames It is KG810 speaker grill x1 \2,940 For 16cm round shape frames It is KG816 speaker grill x1 \5,040 For 20cm round shape frames It is KG820 speaker grill x1 \6,720 For 8cm square shape frames It is K308 speaker grill x1 \1,785 For 12cm square shape frames It is K312 speaker grill x1 \2,520  |
 A photograph is CS series. It is a film capacitor.  A photograph is Attenuator It is R80B. |
Film capacitor If super Tweeter is attached to a back load phon or a resonance pipe an eye will awake. he may be disguised as sound [ like ] The connection method is simplicity and a capacitor. The capacitor of Fostex is made for handmade. How about trying Nagaoka style connection?  Note They are two-piece a set of prices. ____________________________________________________________________________________________________ CS0.47 It is 0.47micro-Fx2 \4,340 CS0.68 It is 0.68micro-Fx2 \4,630 CS1.0 It is 1.0micro-Fx2 \5,280 CS1.5 It is 1.5micro-Fx2 \6,220 Attenuator R82B is large power in super Tweeter, although it is input-proof [ quantity ] type. Since it does not enter, R80B is usually used. Attenuator is a sound pressure level, if it combines with a capacitor. It can adjust finely. In volume. Attenuator of recommendation, and combination of a capacitor Since especially R80B / 1.0 micro F are user-friendly when the first We recommend you. Connection should read a description. ____________________________________________________________________________________________________ R80B 8ohm It is 100Wx2 \4,340 R82B 8ohm It is 200Wx2 \7,600 (input-proof [ quantity ] type) |
Reproduction frequency Super Tweeter name Output sound pressure level  4KHz~33KHz FT96H/100dB/W(1m)  5KHz~35KHz T90A /106dB/W(1m)  5KHz~40KHz T925A/108dB/W(1m)  5KHz~38KHz T900A/106dB/W(1m)  5KHz~25KHz T500A/102dB/W(1m)  Super Tweeter It is used by effect. 7KHz~35KHz GS90A/102dB/W(1m) A 6 dB/Oct continuation variable With Attenuator Capacitor 1.5micro F _____________________________________  The Tweeter stand made from true P30 |
Phon super Tweeter  (Example) It connects with a capacitor (0.47 micro F or 0.68 micro F) at super Tweeter . if the high region of a back load phon has the addition of super Tweeter further High quality goes up. The stand for super Tweeter is also put on the market. Connection of full-range + super Tweeter Although it is with this and reverse , there is no sharp decrease. hearing it, and it being fond, and only coming out and judging with one's ear There is nothing. Super Tweeter changes according to the kind of speaker. A typical association Since is carried, please make it reference. 1. Combine Attenuator and a capacitor. Is the combination of a network with a full range 1.0 micro F first in any cases? We recommend you Attenuator R80B as a 1.5-micro F capacitor. Direction of a D-101 super swan T90A / capacitor CS1.0(1.0 micro F) /Attenuator R80B * This combination can be used by all full range.  capacitor and Attenuator ___________________________________________________________________________________________________ 2. Only CS0.47 or CS0.68 Connects Capacitor. Note They are two-piece a set of prices. Reference combination Phon super Tweeter Rank D-37 / D-118 FT96Hx2 \22,100 D-55/D-3MKII T90Ax2 \29,610 D-58 / D-57 T925Ax2 \55,270 NessieMKII T900Ax2 \71,000 NessieMKIII T500Ax2 \128,000 A kind is not asked. GS90Ax2 It is needlessness \73,000 It upgrades with an internal-organs network easily. Recommended super Tweeter Although GS90A suits anything, recommendation is T90A in the more nearly impossible one in respect of a price. Improvement is good to the thing of an expensive rank, using the beginning. T900A belongs to T90A and is gay touch.  ａ.(+)Connection ｂ.(-)Connection _____________________________________________________________________________________________ The Tweeter stand made from true (for T90 A/T925 A/T900 A/T500A) It is P30x2 \7,890 |
| handmade speaker, it is a reader's collection |
 To the page of a handmade speaker, it is a reader's collection of handmade speaker works. It is making. This E-speaker / plywood cut service are used. The direction carried out should carry your work by this homepage. Please send the photograph taken by the digital camera to mail by attachment. A concrete thing wants to consult. Consultation to E-speaker service  |
| E-plywood cut service | Handmade speaker Basic lecture 02 01 0 (1) (1-1) (2) (3) (4) (5) (6) (7) (8) (9) (10) |
| Sound plaza Ida 6-8-10, Miyamoto, Funabashi-shi, Chiba-ken/Japan TEL (047)425-4445  |
Copyright (C) 2005 by SOUND PLAZA IDA Copyright (C) by 2000 MASAO IDA Display resolution It is manufacturing by HP manufacture soft homepage builder V9 of IBM by 1280x1024 We holds the right on the Copyright Act and unapproved copy reproduction is forbidden law. We holdst Act and unapproved copy reproduction is forbidden law. |
The linked part becomes blue. 
