How to make a swan is careful in order of a plan, and assembles carefully correctly.
Please assemble an assembly in order of a plan. A special tool etc. is
not needed.
It pastes up with the bond for woodwork and a nail is not used.
Plan
[by which the plan is carried -- such speaker -- things --] design way (4)
which is not -- the board of 25
The size of a vacancy is omission in entry. In the Tetsuo Nagaoka chief editor's book
"Kannon power", it is surely.
It is indicated.
Plan D-101S super swan
910×1820mm plywood It is x2 sheet a top. They are 0.5 sheets the bottom.
Assembly figure
........................................................................................................................................................
Please [ plan / which was expanded / from / here ]
Please [ swan / super / whole / of use of a petty tape / from / here ]
.......................................................................................................................................................
.
The assembly method
Structure of a super swan
The bending phon of the body (structure of returning to one once Sound
Way
is divided into right and left)
Please imagine what Sound Way has become from the upper structure figure.
When making, it is very.
It is important.
It is careful in order and assemble correctly and carefully.
Turn like an assembler
..................................................................................................................................
1+2+3+4+5+6+7+(8+9+10)+(11+12)+13+14+15+16
+{(17+18+19+20)+21+22+23+24}+25+26+(27+28+29)
+(30+31+32)+33+34+35+36
..................................................................................................................................
(1) Construct attachment partial [ of Pipe ] (1) - (4) first. Next, it is if it attaches
(6) to (5) of the body and (7) be attached.
If it constructs in order in the condition to say, there is especially
no difficult place.
The body of the upper assembly figure
Please paste up, if it finishes setting up like.
Even this [ ( 's) ] is one part. { } is also one big part. Up to 17-24
Pipe is done.
(2) Although the assembly figure of the bending phon under it may not be known
well, actually construct it.
It turns out that it is said like this that it goes.
(3) Although the bending phon of the body is a difficulty, check before
constructing
a board and pasting up completely.
They are things. Since it will not become a box if it has mistaken, I
think that it does
not make a mistake probably.
The body and Pipe are important also for entering exactly without a crevice.
(4) What are careful of is a terminal. Although usually attached in 35,
it attaches
previously, and it is a wiring code.
Since soldering is carried out, it is attaching in a box.
As for the terminal of a terminal, the direction where the red mark is attached
becomes (+). A black mark is (-).
A connection code is choosing what (+-'s) understands. It can now mostly.
It is.
Color coating of an inside
A process changes by whether an inside is applied. Although I have also applied
the inside during the assembly, sound
Since it becomes good, please do. However, please do not apply to the place which
attaches a bond. A bond
It stops attaching. It finishes setting up fundamentally, and an inside is applied before
attaching in a box after adhesion.
They are things. If it makes for every part, it is easy to apply to an
inside.
A swan can study various foundations also in a handmade speaker.
A super swan and D-118 are the easier ones in a back load phon. This is made.
Since he can understand foundations, I think that a large-sized thing like D-55
can next also be made.
Moreover, although Nessie is a resonance pipe, it is difficult for it
for there to
be no crevice and to make exactly.
Nessie is still a speaker to make. Nessie Mini, Nessie Jr, and rear canon
Please look at the handmade speaker which a handmade speaker basic lecture
and I made.
It is important not to hurry completion.
By finishing carefully, its feeling is put into a work.
There is grain in board material. The whiter one should think a table.
Grain
is arranged finely.
Please choose the surface and the reverse side of board material carefully
not to repent later. A sandpaper is enough.
it is it being alike, being alike smoothly and carrying out
although finally painted, especially a swan is transparent in an image
with white
me because of a swan
Clear lacquer was used. Once applying, a sandpaper is covered and is applied
further.
Moreover, it applies, covering a sandpaper.
It is completion now still more.
The moment the speaker made personally sounded, it is impressed mostly.
Old difficulties are blown away.
It is also a moment. I want to come to make a speaker different from it
again.
.................................................................................................................................
New plan E-speaker service for a handmade lover
[I will make a handmade speaker from a network.]
I surely looking-obtain and please give me your participation.
New opening E-plywood cut service was begun.
It is cheap! It is early! It is easy to make!
.........................................................................................................................
|
Swan a and its friend Nagaoka Tetsuo work 
......
