5 / 10
plywood arrival
Board material is
checked.
NO of a plan
It enters.


Grain of 5/12
plywood
Check side board
It chooses and is
grain. It has united.


1 of 6/4 plan
It makes in order.
Speaker portion


It is correctly with
ruler. A line is
put in with a pencil.
The whiter one of
board material


Every 6/10 part
It is after structure
and is the whole.
It pasted up.
The part of the
front part


From 6/10 1 to 6
The air room of
until A small hole
and a small crevice
material is effective.


From 6/14 1 to 22
Sound Way of
until It is wood
carving during
completion.
1-time coating
of oil



It pastes up all
over 7/14.
From 23 to 35




The place seen
from the top
Inner Sound
Way is well.
He can understand.




The place seen
from width





It is inner Sound
Way from a width
side.





From the 7/25
front part 14
17 beautiful curves
Especially the nerve
was used.





An used paint
Wood-carving oil
It comes out and is 2 times coating.
With urethane
varnish It is 3
times coating.



Urethane varnish
A crack does not
stick. Sound also
becomes good.




8/12 urethane
It finished with
varnish. A low
part is vinyl.
A pebble is put
into a bag.
It covered



Super swan
D58-ES etc.



Amplifier and DVD
Player etc.


Mr. Nagaoka
manufacture
D58-ES
A photograph is
taken by
"way ship."


To Tweeter
T500A is
connected.
A photograph is
taken by
"way ship."


A low part is a
pebble.
It was putting in.
A photograph is
taken by
"way ship."

Manufacture of D58-ES NewFE208ES-R
August 12, 2000 completion
(Manufacture days three months)

 
 What was used for D58-ES

 China ranbar core material core material (*21mmx8)

 I design way [ edited by the collection of drawings ]
  It is a stereo magazine (the May, 2000 issue) in more detail.
 Nagaoka Tetsuo's original speaker work
 new work -- large-sized -- back load phon D-58ES
  Material A woodwork bond, Kibe's material
  (friend company of construction)
 Wood-carving oil, urethane varnish
 The terminal of FOSTEX (T100x2)
 The code for wiring, sandpaper
  Unit FOSTEX (FE208ES-Rx2)
 07.2NEW T500A MkⅡ/NW-90
 * Plywood uses 910mmx1820mm.
 07.6New SP-208.i Adapter ring

  
                      
 Comment of Mr. Nagaoka
 The 20cm full range of the newest of FOSTEX
 Since it corresponded to FE208ES, it designed. Completeness
 of D-58
  the into which ES version does not change basic design
 conditions, either, since it is high
 The depth of an air room is extended 15mm.

  An assembly constructs an inner Sound Way portion correctly
  for  every block.
  If it sets and combines as an order, it can construct comfortably.

  By measurement, it is a rise in the high region of the impedance
  characteristic from D-58.
  it is few and f 特 reproduces high efficiency and low-pass to
  30Hz in a flat
 It is carried out. A high region is a flat to 10kHz, and omission
  from 12kHz.
 It is the beautiful characteristic to begin.


======================================================
* The Itadori figure of D-58 ES-R.i was made.

    Change of the Itadori figure
  D-58ES in the handling description of Fostex of FE208ES-R
  It has carried. It is the combination of reinforcement about a
  part of D-58ES of Mr. Nagaoka.They are a deed and still firmer
   enclosure.
  Mr. Nagaoka / Heavens board One sheet -> Fostex/two sheets
  Mr. Nagaoka / rear One sheet -> Fostex/two sheets
  Mr. Nagaoka / front part Two sheets -> Fostex/two sheets
  Mr. Nagaoka / side board Two sheets -> Fostex/two sheets
  Mr. Nagaoka / bottom Two sheets -> Fostex/two sheets

 ◎thers do not change a lot. It is a
China apiton that it is different
 after all. It is 18mm of plywood.
  Mr. Nagaoka / China plywood / 21mm of
China runbar wood core
m
It is having made it -> Fostex/18mm of China apiton plywood.

 ◎ I hear and modify the opinion of the direction of grain, an idea
   and also a reader.
  The Itadori figure of the newest back load phon D-58ES-R.i
  carried out It created.
  We recommend you 18mm x eight-sheet use of China apiton
   plywood.There is also the China plywood/18mm x eight-sheet
   use of China runbar wood core plywood.
       
 ◎ Also D-58ES.i which modified D-58ES of Mr. Nagaoka in the same
   idea It created.
  The China plywood / 21mm x eight-sheet use of China runbar wood
  
plywood

* detailed description- the handmade speaker basic lecture 06-
  please

======================================================

 Merit of D-58ES
  Pure audio is D-58ES too.
 It is having used ES for the wonderfulness of a back load phon
  and is very power.
 It is a certain speaker. Low-pitched sound is reproduced to
  super-low-pass one.
 the direction which it came and was asked to inspection
  obtaining my DVD and CD such a sound
 It is surprised in it having not known having entered." It is
  reproduction capability so much.
  it is high Ufa is not required at all.

  Although it is a digression, when carrying out the tone quality
  test of a speaker with CD or DVD
 Please choose sauce.
 If a certain direction hears CD which came to hear it and was
  brought personally, low-pitched sound
 It was thought that it had not come out. Although this music
  was the pop of fashion

 Low-pitched sound has not come out and it does not enter.
 I am the same CD about the bird/Stravinski of the fire of a
  pipe organ.
 It applied. Since bull bull air vibrates in super-low-pitched sound
  it is this gentleman.
 When he also made It is surprised. and this, they became
  a motivation.
 As for classic orchestra and a classic pipe organ, low-pass is
 recorded.
 It is. However, the thing whose recording grade, such as old
 recording, is not good is in a test.
 It is unsuitable. Since a recording state is known, a record art
  magazine is looking.
 To become is good. The sauce with which low-pass is on strike
  is prepared.
 Probably, to carry out will be good.

  It is easy to hear it to a musical sound, and D-58ES is that
 it is unexpected also at small volume.

 It is clear audible. Super-low-pitched sound becomes
 possible in one unit.

 It is the charm of Maximum. For FE208ES, an output sound
 pressure level is 99dB (1m).
 The weight of a magnet has what and 3.64K and forcible overly
  powerful low-pitched sound
  It is reproduced.
   


 D-58ES is made.
  Unit FE208ES of limited sale is not put on the market now.
 However, they are limited models, such as FE108ES, at the
  auction of a network.
 How about searching [ since some people got ]?

  FE208Esigma is the unit which is not limitation. To this unit
 In the same suitable CW phon, it is D-55, D-57, and D-58
  (D-58ES).
 There are an another design, besides D-3MkII.1 [ another ].
 It is overwhelmingly to have placed an order for my plywood
  cut service.
 It is D-55. Though regrettable, an order D-58ES and D-58 still
 It is not. Please make someone by all means.

  A back load phon is handmade speaker basic lecture (5).
 being also alike -- it has carried

  It is serious by making that there is weight. They are eight
 sheets in 21mm of plywood.
 Since it uses, if a pebble etc. can be stacked, it will become
  one-set 50kg~60kg grade.
 If it completes, please think that it cannot move at all. The
  place of installation
 If it does not decide and perform before also making the
  position of equipments, such as amplifier
 It becomes then late after being able to do.

  There is such no speaker by the maker speaker.
 Being able to do, since it is handmade, super-pile low-pitched
  sound like a wind is this D-58ES.
 It cannot do, if it does not come out.
 I am having thought that the price of a handmade speaker was
  cut to the maker.
 It is not. that at which a maker is also surprised -- it is an
  uncanny speaker

  If an assembly is made as the turn of a plan, there is no problem.



  Sectional
      1+2+3+4+5+6 +{7+8+9+(10+11)+(12+13)} +14+15+16
      +17
+{(18+19+21)+(20+22)} +(23+24+25+26)+27+28
      +29+30+31+32+33+34+35+36+37+38




 Even this of {   } is a part.
 (   ) It is an assembling-first meaning here.
 
 
 The plan of D-58ES
 It is eight-sheet use about 21mm plywood.
 With 910mmx1820mm plywood, it is
x2 altogether.
 Expansion of a plan Please [ from / here ]

 

 
     

  Make in order of the number of upper .
 Manufacture will be pasted up on a main part, making a part.
 I t is foundations that a nail does not use adhesion only with
 a bond.
 A part requires time until it pastes up. It makes in the daytime
  and night is dried.
 It is such an image to carry out.
 It is not difficult to make. Making carefully slowly is important.
 A front curve is the beautiful portion of D-58ES. It is especially
  this curve.
 I want to finish finely.


  A process changes by whether color coating applies an inside.
  Later, an inside is.
 Probably, it will be better to have not been smeared, and to apply
  since it was good also for sound.
 At a stage while making a part, an inside is 2 times coating of
 urethane varnish. applied.
 2 times coating and urethane varnish of wood-carving oil
 apply an outside 3 times, and it comes out of it.
 It has finished.
 After applying at once, sandpaper is fully used.

  There is especially nothing to prepare about a tool.

 About a back load phon, it is a handmade speaker basic lecture.
 It is alike and is explaining. Please look at here.  

New4/1 2007
FE208ES-R

      NewD-58ES

New6/9 SP-208.i Adapter ring
 Copyright (C) 2005 by SOUND PLAZA IDA Copyright (C) by 2000 MASAO IDA
Recommended display resolution A screen is the optimal at the display of 1280x1024.
It is manufacturing by HP manufacture soft homepage builder V8 of IBM.
We holds the right on the Copyright Act and unapproved copy reproduction is forbidden law.
      Japanese/6-8-10, Miyamoto, Funabashi-shi, Chiba-ken Sound plaza Ida
                       TEL(047)425-4445
The linked part becomes blue.
  D-58ES
http://phi-blhorn.monsite.
wanadoo.fr/page8.html

It is introduced to DIY Phi BLH.
Better.
Please click nagaoka.
  
Handmade speaker
To the man in the
world
  ............

NewT500A MkⅡ+NW-90

O D58-ES manufacture process photograph collection
The view of a photograph
A photograph will be expanded if it clicks.
O Return IE's by click.
 Shift to the maximum resolution
  In the present maximum resolution
 1280x1024
 It has shifted. Homepage
 Since he wants to take out force
 for a photograph more
 The amount of information of
 a screen comes
 size simultaneously. The mode in the
  direction of looking

   
Resolution 1280x1024 60%
     Resolution 1024x768  30%
     Other resolution    10%
    Wish
 An index is displayed on the left.
 When not displayed, it clicks
here.
 Please carry out.
E-speaker
service
E-plywood
cut service
Effect of
superTweeter
  Handmade speaker basic lecture (02) (01)  (0) (1)  (1-1) (2) (3) (4) (5) (6) (7) (8) (9) (10)

  Handmade speaker is made 
(D-58ES)
 (NessieJrES)  (Rear canon II) D-101S Super swan
 It mails from
  Mr. Greg Fav.

 Hello,
 Do you have D37-ES
 (D-37ES) plans ?
 Can you send them
 to me ?
 I am from France and
 it is impossible to find.
 Best regards, Greg.

In this way, it connected by mail
several times.
D-37 was completed after that.
It is me to a homepage.
D-58ES has also appeared.

   It links here. go・・・
Fostex New product
    information 2007
  With A&V Festival 2006
  It was announced and
   exhibited.
  
 FE208 ES-R
 
It is a click and is go.go